ESI K.ON Guide de l'utilisateur télécharger pdf (Page 5)

K.ON ESI

2. Hardware Installation

Before driver installation, please locate your original Windows CD (if you are using Windows), as

you may need it during installation. Please also make sure to install the chipset drivers for your

motherboard if you have not done so already.

Find the USB port on your computer. A sample USB port is pictured below. It is typically located

next to the PS/2 or serial ports on the back of your computer.

Plug the K.ON USB cable (Series A plug type) into the USB port of your computer. The other end

of the cable will be connected with K.ON.

K.ON gets the power from the computer via USB cable by default when connected to a computer

and after you have switched it on. The LEDs of K.ON will be turned on once the unit is powered

and connected to your PC.

MIDI connection

If you are not using the USB connection to your computer, you can also use the MIDI out port with

a standard MIDI cable. This will be connected to the MIDI input of your MIDI interface or

soundcard for example.

3. Software Installation

After K.ON has been connected to your computer, you can immediately start using it. Under

Windows, a new MIDI input device called USB Audio Device will be available in all your MIDI

compatible applications. Under Mac OS X, a new device called K.ON will be available.

This device can be selected as MIDI input source in all MIDI compatible applications. How this is

done, varies from application to application, so please consult the manual for your audio/MIDI or

notation software for more details.

1 2 3 4 5 6 7 8 9 10 ... 16 17

Pas de commentaire

ESI K.ON Guide de l'utilisateur Page 5