ESI Waveterminal 192 Spécifications télécharger pdf (Page 23)

ESI Waveterminal 192

1. MIC IN

This is MIC input of Waveterminal 192L. You can use dynamic or condenser

microphone and it supplies +12V DC phantom power. You cannot use MIC input and

Line input at the same time. You can choose MIC input or Line input on the control

panel of 192L.

When you use condenser MIC, you can turn on/off phantom power switch on the

control panel.

2. LINE IN -Analog Input(stereo)

This is analog Line input. It is stereo +4dBu Unbalanced connection. You cannot use

this Line input and MIC input at the same time.

3. 4. Analog 1,2/3,4 Output (stereo)

These are stereo Analog Outputs. Analog 1,2 send out the signal indicated as ‘1-

waveterminal 192 2ch’ on application’s device set up. Analog 3,4 send out the signal

indicated as ‘2-waveterminal 192 2ch’ on application’s device set up. Using TRS 55

phone plug, send two signal from one output port.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Pas de commentaire

ESI Waveterminal 192 Spécifications Page 23